Jiangsu Aoguang Corrugated Pipe Co.,Ltd
Address:Shuguang industrial park jiangyan taizhou city jiangsu province China
In the dehumidification, if the improper operation can easily cause failure. In the common fault of the BBD Blast Furnace Dehumidifier, there are some operation errors caused by the environment, and others are the problems of the instrument itself.
The air cooled by the evaporator is then heated to the original temperature and then sent indoors, so that the indoor environment remains relatively constant in the case of humidity degradation. There are two ways to heat the outlet temperature: one is to use an electrothermal component to heat the air through the evaporator. This kind of air conditioner is equipped with electric heating device in indoor machine, when the air through the evaporator (surface low temperature) precipitation condensation water, and then by the heating device heated this part of the air has cooled, so that the air conditioner outlet and the temperature of the inlet to maintain the basic agreement; the other is to use the heat generated by the condenser to heat the dehumidification air.
BBD Blast Furnace Dehumidifier Refrigeration system and other refrigeration equipment room is similar, but because of its particularity, in poor dehumidification effect, it may not be the problem of the BBD Blast Furnace Dehumidifier itself. For example, at room temperature of more than 40 ℃, BBD Blast Furnace Dehumidifier start stop frequently; when the BBD Blast Furnace Dehumidifier is running, the indoor temperature rises or the musty odor in the room may be caused by the power failure of the BBD Blast Furnace Dehumidifier.
Common problems of dehumidification are: low voltage, loose sockets, loose wiring, wiring errors, fuse fuses and other failures; the power supply of the BBD Blast Furnace Dehumidifier protection device is disconnected, the water cooler is positioned incorrectly and the BBD Blast Furnace Dehumidifier automatically stops, so we must check the BBD Blast Furnace Dehumidifier thoroughly.
BBD Blast Furnace Dehumidifier air filter plugging, poor ventilation, indoor wet air is very difficult to flow through the evaporator, which affects the BBD Blast Furnace Dehumidifier dehumidification effect, at this time need to check and clean the air filter, until dry and then installed.
The outlet is obstructed, resulting in air flow is not smooth, thus affecting the dehumidification effect, at this time the need to the BBD Blast Furnace Dehumidifier out of the vent at the obstacles to move away, or the position of the mobile BBD Blast Furnace Dehumidifier to improve the dehumidification effect.
The refrigerant in the BBD Blast Furnace Dehumidifier is insufficient, it will directly lead to the lack of refrigeration, reduce the dehumidification effect, at this time need to supplement the refrigerant to improve the refrigeration capacity of the BBD Blast Furnace Dehumidifier.
1, BBD Blast Furnace Dehumidifier should avoid the use of heat, to keep in and out of the air outlet, in general, the BBD Blast Furnace Dehumidifier should be placed in the center of space is more appropriate, the surrounding should have enough space, do not stack items. Keep the air smooth, can achieve even dehumidification effect.
2, refrigeration BBD Blast Furnace Dehumidifier in low temperature (18 ℃ below) environment conditions use, will be frosting or icing, with defrost function of the opportunity to automate the dehumidification, but do not take defrosting function of the BBD Blast Furnace Dehumidifier, can be used artificial cream (power off mode). Generally, the temperature is low, humidity is low, humidity is below 40%, the effect of dehumidification may not be obvious, the speed is slow, this is a normal phenomenon.
3, the room environment humidity set to 60% below, can effectively prevent dampness and dehumidification, preventing articles mildew. Wet quilt and mattress seriously affect our sleep quality, can be dehumidification dryer to dry quilts and mattresses, the specific operation is to close the room closed windows, no one will be the humidity set to dry clothes, someone in the case of humidity set to comfort file can be.
4, dehumidification volume is measured under the standard environmental conditions if the dehumidification volume Standard 50 liters/day, refers to the 30℃/rh80% in the environment 24 hours measured water volume. BBD Blast Furnace Dehumidifier in the process of operation, out of the air vent is the normal operation of the machine phenomenon, low humidity in winter, the outlet temperature is also significantly reduced, is a normal phenomenon。
Previous: No Information
- Damper For A Brief Introduction
- Compensator Simple Overview
- Compensator Selection Techniques
- On The Question Of Selection Of Com...
- Compensator For Reliable Research
- Compensator Durability Test
- Main Functions Of The Expansion Joint
- Expansion Joint Structure
- Overall Design Of Expansion Joint
- Control Points Of Expansion Joints
- Application Of Metal Hose